(1) Manual Un-coiler 1 set
(2) Leveling Device 1 set
(3) Roll-Forming M/C 1 set
(4) Hydraulic cutting (with four cutting mould) 1 set
(5) PLC Control System 1 set
(6) Product rack (un-powered) 1 set
(1) Manual Un-coiler:
Un-powered; single head; max. Capacity: 3000kg;
Coil inner-diameter: 508mm
(2) Leveling Device:
It used for making the material flat before feeding
into the roll forming machine.
(3) Roll-Forming M/C:
13main steps and 7 auxiliary steps to form; Material
of Roller: GCr 15;
It can make all the size of profile in the table through
changing the position of the rollers.
Voltage:380V/50Hz Forming speed:0-10m/min;
(4) Hydraulic Cutting:
Stop to cut ,Post cut Cutting tool material:Cr12,
tolerance of the cutting length 4mm
It has four cutting mould with the line.
If the customer wants to more cutting mould, he has
to pay for the extra moulds.
(5) PLC Control System:
Using Mitsubishi PLC Control the quantity, length automatically,
Option Hydraulic un-coiler
Hydraulic system to expand coil inner hole;
Frequency Inverter to regulate turning speed,
Automatic stop device;Load capacity = Max.3Tons;
C & Z Purlin mainly use hot roll steel strip or
hot dip galvanized steel strip at thickness 1.5~3.2mm.
it is roll formed by C or Z shape roll forming machine
Decoiling the Sheet—>Sheet Guiding —>Coil
Strip Leveling—>Roll Forming—>Punching
horizontal hole—>Punching for vertical hole
—>Measure Length —> Cutting the Panel—>Panels
to the Supporter.
The products of C or Z shape purline forming machine
have excellent anti-bending property and are
easy to install. They are widely used as the supporter
of roof and wall in large-scale and mid-scale
construction, such as factory, warehouse, garage, exhibition
center, cinema, theatre, garden and so on.